Contact Us
- No.8 Shangxian Road North Industry Zone, Huangyan, Taizhou, China
- info@halomould.com
- +8613750618222
-
18/Jun
2026
How is mold trial conducted for injection molds?
Conducting a mold trial (or mold testing) for injection molds is a systematic engineering process designed to verify the mold's functionality, optimize processing parameters, a
-
08/Jun
2026
Why do injection molds require mold trials?
Injection mold testing (also known as mold trial) is a critical step before mass production. 1. To Verify Mold Quality and Structural Reliability Mold testing confirms whether the
-
28/May
2026
How can we prevent potential mold issues at the product design phase?
Optimize Wall Thickness Keep it uniform : Uneven wall thickness is the leading cause of defects. Thick sections cool slower than thin ones, leading to sink marks (surface depressio
-
24/Apr
2026
Does injection moulding produce waste?
Yes, injection molding does produce waste, but it is a highly efficient manufacturing process where much of this waste is managed and recycled. Types of Waste Generated Waste in in
-
14/Apr
2026
How many types of injection mould are there?
There is no single, definitive number for how many types of injection molds exist. This is because they are classified in various ways depending on different criteria, such as thei
-
11/Mar
2026
Injection Molding Process
I. Filling Stage Filling is the first step in the entire injection molding cycle, starting from mold closure and injection until the mold cavity is approximately 95% filled. Theore
-
04/Feb
2026
Main types of injection moulds
Main types of injection moulds By mould structure Two-plate mould (single cavity mould) The simplest structure, with only a fixed mould plate and a moving mould plate. It's sui
-
14/Jan
2026
What is plastic injection moulding used for？
Packaging Industry Produces a wide range of packaging components like plastic bottles, caps, containers, and thin-walled trays. Ideal for high-volume production of uniform, lightwe
-
09/Jan
2026
What is cycle time in injection moulding？
Components of Cycle Time Clamping and Injection Phase (0~5 seconds) Mold closing → Screw forward to inject molten plastic → Pressure holding and compensation Cooling and
-
09/Dec
2025
What capabilities should an injection molding company possess?
Technical R&D and Process Capabilities Mold Design and Manufacturing ：Capable of independently designing high-precision, long-life molds, and mastering manufacturing technologi
-
24/Oct
2025
What are the structural components of injection molds?
Injection molds are essential tools in the manufacturing process of plastic parts. They are typically made up of several structural components, including the mold base, cavity, cor
-
04/Aug
2025
Why do the service lives of the same injection mold vary?
The lifespan of injection molds not only affects the cost of mold opening but also influences the production cost. The lifespan of injection molds is influenced by multiple factors